1 3/4″ pin top – fluted baluster
Available primed and in red oak only
Note: The 2015 baluster series is designed for a 3 length baluster arrangement. See image below:
The base of the balusters as well as the tops follow the “rake” angle (the angle of the stairway).
How to order these balusters:
For 34″ – 38″ rake heights and two balusters per tread: For 34″ to 35″ rake heights use a 34″ first baluster and a 38″ second baluster. For a 35″ to 38″ use a 38″ first balusters and a 42″ second baluster.
For 34″ to 38″ rake height and three balusters per tread: For 34″ to 35″ rake heights use a 34″ first baluster, 38″ second baluster and a 42″ third baluster.
For a 35″ to 38″ rake height you’ll have to use a 38″ for the first baluster and 42″ for the second and third baluster. When using a three baluster per tread system at least two of the baluster bottoms will need to be trimmed for proper alignment.
Warning: At a 35″ to 38″ rake height the 42″ baluster may be too short to fit under a gooseneck fitting.
Other Carolina balusters